Misconceptions about Timber Housing

2 minutes, 22 seconds Read

Timber frame housing is becoming increasingly popular, but some people still have reservations about building a home with wood. Here are some common reasons people give for being doubtful about timber housing:

Ineffective Noise and Sound Insulation

When you think of sound insulation, dense and heavy materials would be best for deadening all types of sound. While masonry construction has an advantage over more lightweight timber, a high sound reduction can be achieved with a timber frame. The solution is to build two walls incorporating a structural break between them. The gap is then partly filled with sound-absorbent quilting, such as mineral wool. Similar material can be placed in flooring; Plasterboard can also be replaced with a heavier board or used in a double layer.

Image credit


People often assume that timber will be vulnerable to infestations and rotting. It is scarce for a modern timber frame to suffer from rot. Exterior wood, such as cladding and fascia boards, is prone to rot if not well maintained, but the structure is well-protected. Wet rot is the most common form of fungal attack, although the other state, dry rot, is the one that provokes the most fear. For either of these to survive, there must be a very high moisture content in the timber, usually at least 20%. The moisture content in a modern heated house will usually settle down at about 12%. If it is denied the requirements of warmth and dampness, the rot will never be able to become established. For advice from Timber Merchants Salisbury, go to Timbco, a leading Timber Merchants Salisbury firm.

Image credit


Yes, timber can burn, while masonry and steel don’t. This can lead to the conclusion that timber homes are unsafe. The actual situation is more complex. The progress of most house fires and the likelihood of death or injury is mainly determined by factors such as whether there are smoke alarms fitted, the behaviour of the occupants, and the flammability of the contents of the house. Regarding the risks to people, the crucial factor in survival is how quickly people can escape. If anyone is trapped, how long the construction of the house will protect them from flames and smoke until they can be rescued is essential.

When a timber beam is set on fire, the outside starts to burn immediately, as you would expect, but after the outer parts of the beam have been burnt, they turn into charcoal, which does not burn and insulates against heat. Because of this charring effect, the centre of the beam is protected from damage for a long time before the beam fails and collapses. Steel will eventually melt and collapse. The frame is clad in material that resists heat and flames, usually plasterboard, and there are barriers built into cavities in the building to block flames from spreading.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.